Recovery

The recovery boot method switches the DUT into or out of recovery mode. It is used together with the recovery deploy method.

- boot:
    method: recovery
    commands: recovery
    timeout:
      minutes: 5

commands

Required. Either:

• recovery: power off the DUT, run the recovery_mode_command from the device dictionary and power on the DUT.
• exit: power off the DUT, run the recovery_exit_command from the device dictionary and power on the DUT.

The DUT is powered on and not reset, so the effect of the recovery commands is kept until the exit boot action.

No serial connection is opened: the DUT output is not read.